Supplies

Filters are the first line of air filtration defense for your CPAP system and should be replaced when dirty or every month. Standard filters trap large floating particles such as cat hair and dander. Your machine will typically come with a standard...

The Side Cover is an optional accessory for use with ResMed Airsense 10 CPAP, AirStart 10 CPAP and AirCurve 10 BiLevel Machines. This side cover fits over the slot where the humidifier chamber would usually be installed in the device.  This allows...

ResMed AirMini P10 Mask Connector If you have an AirMini CPAP or AirMini HumidX HME humidifier, the ResMed P10 nasal connector plus CPAP tubing is the solution you’re looking for.    Simply attach the connector to the tubes on the AirMini...

ResMed's AirMini CPAP Tube is thinner and more flexible than traditional CPAP hoses and tubing making it great for use at home or travel. The simple, intuitive connectors on the design make it easy to attach and remove from any compatible mask connector...

USAGE: This Universal Power Supply will automatically adapt to voltages in most countries worldwide. (A plug adapter may be required for use outside of North America.) It is the only power supply that should be used with AirMini sleep therapy...

ResMed AirMini N20 Mask Connector The ResMed AirMini N20 Mask Connector is designed to fit the AirMini CPAP device and any AirFit N20 Nasal Mask.    The 4-inch-long connector replaces the elbow supplied with the original N20 mask so that...

The ResMed AirFit F20 Full Face Mask Connector for AirMini CPAP Machines is designed to replace the elbow included with ResMed’s AirTouch F20, AirFit F20, and AirFit F30 Full Face Masks. It is used for connecting them to the CPAP tubing found on...

This kit includes the Bed Caddy Mount and three modules: the Mattress Module, the Hook Module, and the Wall Module, along with instructions on how to properly use each to secure your AirMini Auto-CPAP in various configurations. Mattress Module: The...

ResMed AirMini HumidX Standard The ResMed AirMini HumidX Standard is a waterless heat and moisture exchanger (HME) that is designed to add moisture to the air delivered by the AirMini travel CPAP machine. It is a disposable cartridge that is inserted...

The Disposable Fine Filter for AirMini™ Travel CPAP Machine prevent fine particles and dirt from entering your sleep therapy device and ultimately your airways.  They are original ResMed branded filters compatible exclusively with the...

These disposable filters from Breas are designed exclusively for use with Z1 and Z2 series. Disposable filters remove impurities from the air as it is drawn into your CPAP machine to ensure they don't damage your CPAP. USAGE: A filter must always be...

USAGE: SlimStyle Tubing has a smaller inner diameter than the standard CPAP tubing, it is designed exclusively for use with Z1 and Z2 Series CPAP Machines. The Z1 & Z2 Custom Tubing Adapter is required to attach this tubing to your CPAP machine...