null
Breas Battery For Z1 Z2
Email
Call
Share

Breas Z2 Extended Life Overnight Battery (For Z1 or Z2)

(No reviews yet) Write a Review
SKU:
006910
$399.00 $399.00
Prescription Not Required
Standard Nationwide Shipping

Out of stock

COMPLIMENTARY PRODUCTS

Breas HDM Z1 & Z2 Power Supply

Breas Z1 and Z2 Power Supply

$73.95 $73.95
This Universal Power Supply is designed for use with the Z1 and Z2 series CPAP machines. It is the only power supply that should be used with Z1 and Z2 machines. A North American AC Power Cord is...
Shop
Breas HDM Z1 & Z2 Custom Tube Adapter

Breas Z1 and Z2 Custom Tube Adapter

$14.95 $14.95
The Custom Tube Adapter attaches to the back of Z1 and Z2 Series CPAP Machines between the air outlet port and the CPAP tubing. With the Custom Tube Adapter in place, Z1 and Z2 Series CPAPs are...
Shop
Breas HDM Z1 & Z2 Custom USB Cable

Breas Z1 and Z2 Custom USB Cable

$13.95 $13.95
The Breas Z1 & Z2 Custom USB Cable is an auto power plug to 2.1mm DC plug. This is a custom sized USB to the micro-USB data cable. Enables data transfer and firmware upgrades between your PC and...
Shop
Breas HDM Filter for Z1 Z2

Breas Z1/Z2 Polyester Filter - 2pk

$8.95 $8.95
These disposable filters from Breas are designed exclusively for use with Z1 and Z2 series. Disposable filters remove impurities from the air as it is drawn into your CPAP machine to ensure they...
Shop

HDM Z2 Extended Life Battery

The Breas Z2 Extended Life Battery is a rechargeable lithium-ion battery. It integrates with a PowerShell to provide a fully integrated battery option for Z1 & Z2 Series CPAP Machines. 

The Extended Life Battery gives you more CPAP therapy time even when you can't plug in your Z1 or Z2 CPAP machine.  

Great for Travel

Take the Breas CPAP battery on the plane for overseas travel, in your backpack for overnight camping, or in your saddlebag for motorcycle road trips.

PowerShell Sold Separate 

The Breas Z2 PowerShell Module for Z1/Z2 is required to use this Battery Module.

How to Charge Your HDM Z2 Extended Life Battery

To charge the Extended Life Battery Module:

  1. Insert the CPAP device and the Battery Module into the PowerShell.
  2. Plug the AC power supply into an outlet.
  3. Place the machine in standby mode (the display will read 0.0).
  4. A fully drained battery may take up to 8 hours to recharge. 

Estimated Battery Run Time 

Manufacturer testing shows the Extended Life Battery will power a Z1/ Z2 CPAP for 8.9 hours at 20 cmH2O. Actual run time may vary due to machine settings, machine pressure, and personal breathing. Lower therapy pressures will result in extended battery operating time.

Battery Details

Battery Type: 14.4v Lithium-Ion Battery Pack 

Battery Capacity: 99.4-Watt Hours 

Battery Size: 6.125 x 4.00 x 1.375 in.(approx.) 

Battery Weight: 15.5 oz.(approx.) 

Battery Run Time: 1-2 full nights per depending on settings. Lower pressure settings will increase run times, and higher-pressure settings will decrease run times. 

Battery Recharge Time: Up to 8 Hours When Fully Depleted (Typical Per Battery) 

Battery Life: 300 Cycles (on average)

Important Notes

Additional notes on your Breas Z2 Extended Life Overnight Battery for Z1 & Z2: 

  • For longer battery operating times, fully charge your integrated CPAP battery before the first use. 
  • For complete care and use instructions, refer to the manual that came with your equipment.
  • Integrates with the Breas PowerShell Module, sold separately.
  • Compatible with all Z1 & Z2 Series CPAP Machines.